- What to do and why?
- started - it is afraid of the master!
- frame - the basis of the ceiling
- final touch!
- Photo multilevel structures ceiling
- Engage the imagination
you want to visually enlarge the space and height of the room?In this case, the ideal option would be to make a multilevel ceiling with his hands.Yes, you did not seem it with their hands.Do not think that this work is only the power of the professionals who take a lot of money for it.If you get to the mounting technology of multilevel structures, you will realize that the power of this work to you.Although in this case will have to sweat, but the result will satisfy you completely.So, get started!
What to do and why?
Today there are a wide variety of building materials, which are, in fact, can be used to manufacture multi-level ceilings.For example, one of the most popular and more readily available materials - gypsum board.It is on this and will be discussed further.But you may
- Thanks to him, you can visually enlarge the common space of the room, in fact, he geometrically rebuild the look of the room.
- can easily close some defects in the rough ceiling, and put him in the important communications: electrical wiring, ventilation, water and even sewers.
- Zoning large room without walls.For example, you can select one or another figure of the ceiling different functional areas - kitchen, living room, dining room and so on. N.
- create unique ways at different levels of illumination of the ceiling.
And these are just some reasons why you should choose this way of handling their ceilings.Now a closer look at the process of installing a multi-level structure.
started - it is afraid of the master!
Like any other work, installation of multi-level ceilings should start with training.Before you decide to make it a project, it is important to understand what function it will perform.Here are some of them:
- Highlight functional areas of the apartment.
- Zoning space.
- underscore the individuality of the room.
- screen to hide communications.
Whatever function or perform such a ceiling is important at the outset to make his sketch.
With its creation, be sure to consider the size of the room.Very large figure in a small room can diminish its value.It is important that it is perfectly fit into the size of the room.For example, a project of the future of the ceiling can be carried out with the help of computer programs.If this is not possible, you can take a large sheet of paper.It all depends on your imagination.It is not necessary to adhere to the templates, which you see on the internet.Try to approach the creation of a sketch creatively and individually.
frame - the basis of the ceiling
frame tiered ceiling
for manufacturing a skeleton used galvanized profile.However, before installing it is important to make the marks on the ceiling.At this stage, high accuracy is crucial.Thus it is better to use water level, which will help you to accurately set the foundations of the first level of the ceiling.Essentially marking of the first level is the same as that of the single-level of the ceiling.Along the perimeter of the wall slugger level.Once stuffed UD profile (guide).After a distance of 40 cm, the guide UD profile insert CD profile.It is this profile must be secured directly to the ceiling by means of hangers (or as they are called - the crocodiles).
In those places where the planned laying of the second and third, respectively, the ceiling should be strengthened structure.If subsequent levels will have minor dimensions, the gain should not be pursued.As soon as the first level of the ceiling is ready and sewn GCR, you can transfer the shape of the second and third level in the ceiling itself.After using the same profile and suspensions you create the necessary shape.Observe the proportions and dimensions.Always keep an eye on the level of design, testing her instrument.
can safely say, when the frame is ready, half the job done.After headlining it will not take you as long as the design and manufacture of the frame.However, before you sew each layer plasterboard is necessary not to forget about lighting.To do this, you need to lay wires to the places where it is planned lighting or a chandelier.Illumination give the whole figure chic look.After skin plasterboard with a special crown, you can cut holes for the next fixture.
Mounting tension of the ceiling
for vertical mounting of the structure, namely the end of the it is important to measure the desired width of the strip.For example, it can be pre-cut to the floor, or directly to the ceiling.How?First fasten the strip from the GCR larger, and then using a knife or a special hacksaw carve exact size.In this case, the guide will be the profile itself.
the job better perform together.When everything is ready, we can only proshpaklevat.On the corners stick the corners.If it is bent, then buy plastic corner.If the line is aluminum.All seams are required to cover the special tape and putty for the stitches to process them.After the grout you will only paint it.So your ceiling is ready!
Photo multilevel structures ceiling
Engage the imagination
to create multi-level ceiling with his hands there is no limit imagination.In this article, I spoke exclusively about drywall.But there are building materials, which may also be used.For example, some combine them, drywall and suspended ceiling.Look for the most original ideas.You can share them with us.Write in the comments to this article, the difficulties you have faced and how you overcame them.Your experience will help many more, so we are waiting for your participation!
offer you a video installation about the secrets of multi-level ceilings.
also watch the video of the installation of a multi-level structure of the drywall.