- basic requirements in the regeneration of the garage
- How to install racks and shelves
- How to arrange a viewing hole
- most necessary equipment in the garage
garage - it is a second home for motorists.This structure not only serves to hide the car in bad weather, but also a place to store all kinds of instruments, often a "mini-workshop" host, where you can make almost any repair.Each owner settles the garage under.Some are not very serious to the equipment room, and it starts to bring more problems than benefits.Yet, the majority of motorists trying to adhere to certain requirements that are important to perform for easier maintenance of your car.Thus, construction of the garage with his hands requires compliance with certain requirements.
basic requirements in the regeneration of the garage
How to place tools in the garage
Construction of a garage space means that there will be quite warm and dry.
very important to reliably protect the room from outside penetration.Equipping your garage, remember that access to the tools or equipment, which will be located in a garage should be as convenient and simple.Therefore it is better to think in advance about the location of the storage sites.
In general, it is only the minimum requirements that are desirable to consider for your own comfort.You can also at will complement and equip garage additional funds for the repair and maintenance of your car.Workbench with tools and inspection pit can be a great addition to the equipment room.
How to install racks and shelves
Shelving under the ceiling
For the most comfortable arrangement of the garage requires a lot of space, and it is often a problem.Storage working tools and equipment also takes a lot of space.Therefore, the self-regeneration of the garage as much as possible try to accommodate space for shelves or cabinets, but so that they do not interfere with the free movement throughout the room.Shelves can be mounted wherever you are for them will not cling or bump, over tables, windows, shelves and so on.
Construction of a garage in the corner area
It is often convenient to equip a variety of wall shelves and equipment, which is furthest away from the gate.It was there that a basic working tools, air compressor, bench and so on.All at hand and does not interfere move around the room.
large number of shelves in the garage - is a big plus, but it is also worth thinking about a small cabinet, which could hang work clothes and put some rags.
How to arrange a viewing hole
Driving viewing hole
question of the presence or absence of a viewing hole is quite different.First you need to decide - how high the need for regeneration of a pit.There is no point in its equipment, if you frequently use the overpass on the street.
If you decide that such a hole you need, then we must remember that the walls and floor should be concrete.The edges of the hole should be reinforced with iron corners.It should also be envisaged, what and how you will close the viewing hole in its non-use.
The small hole can be positioned equipment, which can be useful for repair, the walls may be prudent to make a niche, it was convenient to put the used tool.Also take care about lighting the observation wells, install lighting or equip place for a portable lamp.
most necessary equipment in the garage for the usual
change a wheel or disc replacement, the most common of the work under the hood of a car is enough for a standard set of tools and a jack.But in order to perform more complex work - requires special equipment.
workbench with drawers for tools
For manufacturing workbench is best to use wood and metal.Working area is best covered with a piece of metal, preventing the tree from rapid wear.Workbench is best done in two or three levels to place as many necessary things.
welding machine for the garage
For normal body repair will be enough welder or with tungsten electrodes, which are in inert gas or carbon dioxide machine that welds metal wire.
Such a device is used to clean the air of vapors, oil droplets, water, and other fine particles that may be present in it.This is a very handy device for use in painting cars and promoting uniform distribution of the paint on metal.
Of course, we are not talking about professional cleaning.And just about that which may be equipped in his garage each.To do this you will just need to bring a hose or pipe to supply water to the garage and make the sink drain.At the same time, remember that electric lighting and will need a more thorough protection.
quality ventilation and lighting
Ventilation in the garage scheme
very important to create a high-quality ventilation in the garage, it not only saves room from unpleasant smells and harmful, but also protect it from dampness and excessive dust.
Vents usually do on both sides of the gate at a low altitude and close the bars.The same holes are made, and on the opposite wall, but the ceiling.
Overhead lighting garage
Of course, the best coverage - it is natural, therefore, if possible, is to think of a window.If this is not possible - then make multiple lighting zones: above the Stage, general and portable, which can highlight the most necessary.
using our tips and advice on self-premises equipment at the garage, you'll get a beautiful and comfortable space for the maintenance of your car.
example of arrangement of the garage you can see below:
concreted pit observation
Professional improvement garage
shelf instruments lamp
Construction viewing hole
Arrangement garage for two cars
metal workbench with drawers
Stairway to viewing hole
Wooden shelves with metal frame
also foreverything you need to buy a garage metal cabinets for tools, racks, benches and other garage equipment, which fit into the interior of the garage.