- Features mounting
- Window boxes of wood
majority of interested users are well aware of the fact that the operational reliability of standard window designs is largely dependent on the correctnessinstall them in the doorway.In accordance with the requirements of regulatory documentation for installation of such structures (whether modern or typical glazed wooden window frames), the user must first be worry about their correct orientation in the vertical and horizontal planes.
In addition, it should not forget about such important elements of window glass, what are the valves and a set of special seals, responsible for the safe pair of elements and sealing compounds formed.
materials for fixing PVC windows
course, is more reliable if the installation of the glass will be engaged experts (representatives of the supplier), the more it suggests a further warranty specified in the design.But in some cases it may be an independent installation of window units, if pos
Correct installation of window blocks necessarily implies the following technological requirements:
- itself between the frame and the window openings required installation clearance of the order of 15-40 mm required for compensationtemperature resize design elements.At the same time (despite the presence of the corresponding gap) all connections in the pane, as well as its articulation with an aperture must be completely sealed.
- If this gap junctions in some places considerably exceeds the permitted limit - you have to modify the doorway, his emptiness brick, foam or other suitable material for this purpose.Of course, this approach is only possible when irrational to use a large amount of foam to fill existing voids.
- To form the desired gap is often used special plastic (wooden) wedges, defining its value at the lower edge of the profile and allows you to adjust the position of the unit horizontally.
- Installation prepared construction is carried out by fixing it in the window opening by means of special anchors (using standard screws, bolts and dowels).
When using anchor bolts through the frame profile with holes of appropriate diameter, followed by a recess in the wall of the opening 40, 50 or 60 mm (depending on the material masonry).Pre-fixing anchor slightly baits in dowels.Their final penetration into the wall should be carried out only after binding alignment window in the vertical and horizontal planes.
Fixing by plates
During installation, you should always keep in mind that the design of the anchor allows its technological shift in the seat without disturbing the integrity of the joint.As if to fix the unit in the opening selected specific anchor plate, attached to the end of the frame - the possibility of such bias is provided of the mounting structure.
How is the window GOST See the following video:
used with the sealant should have special properties that allow domestic water vapor to go outside and prevent the ingress of moisture from the outside.By such selective properties have specially developed for this purpose sealing tape of butyl rubber (PSUL).This type of sealant is recommended for use with the landing clearance width of up to 40 mm.
installation diagram window
At the final stage of work you can go to the slopes window decoration design, execute one of the following ways:
- plaster slopes conventional sand and cement mortar used to close the brick (or concrete) walls;
- finish with plastic panels, order of attachment of the structure which provides you purchased glass.
Driving slope of sandwich panels
Window boxes of wood
Installation of windows in a wooden house has its own specifics, due to the fact that the walls of these buildings are more susceptible to weathering.In order to protect the window construction of the thermal strains when installing an additional unit must be used under the name "obsad."The basis of this design is the casing box (on another - okosyachka), which is embedded in the window opening a wooden box, which subsequently secured frame of the main window.
angles casing box sealed with a special silicone sealant, while its upper mounting clearance laid prearranged mineral wool.The lower bridge and sidewalls boxes sealed with natural jute, fixed by them in the usual construction stapler.To fix the box in the window opening is quite amiss conventional screws or screws of appropriate length.
According SNIP, assembling insulating glass PVC carried out in a similar manner;thus sealing gaps used materials supplied construction window.Upon completion of installation works the inner gap between the glazing and the casing box is closed special profile and its outer side is finished with using the standard trims.
installation of wooden windows with tape PSUL: