- basic requirements
- building freestanding boiler
- device upper floors
- Features finishing
- If the electric boiler
- Features space for installation of solid fuel boiler
- requirements for the boiler room withgas boiler
you decide to make the boiler room?In this case, you need to familiarize yourself with the features of this building and its construction methods.Requirements for the boiler are determined depending on what kind of fuel is used and where it is located.
Location boiler room in a country house
So by location boilers are:
- Detached - are separate building is connected to the home of the only utilities.It is the best solution, because in this case, you are not limited in the choice of the boiler heating boiler in no way would disturb people living in the house.
- Attached boiler are separate buildings, which are adjacent to a wall of the house.
- Built boilers are always in one of the rooms of the house.In accordance with the safety not every heating unit may be installed in the building.
in a boiler room can use a maximum of two boilers.Ventilation, and thus the chimney must comply with the established power and design of the unit to heat the living space.
boiler room can be tiled
walls can be constructed from concrete or brick.Paul can be covered with sheet metal, it is also possible to lay stoneware tiles, or just leave the concrete.As for the walls, they can be oblitsevat non-combustible mineral plaster or tile.The door should have a boiler fire properties.Around the boiler must always be sufficient space for easy operation and maintenance.The size of the room for the boiler is defined in the technical documentation.In this article you will learn how to build a universal boiler, detached.
building freestanding boiler
Installation ground loop
should first take care of a house-ground loop.For this type in the ground metal 4 pipe having a diameter of 57 mm at the perimeter.Driving depth of 3 m, then the pipe should be connected to each other, it can be done by welding.Make the connection to the ground brownie circuit by connecting a steel rod having a diameter of 12 mm.
After the strip foundation is ready, you can start the construction of load-bearing walls, while at the bottom or top of the wallit is important to provide an opening for ventilation.Boiler room must have its own walls, which are separate unrelated to the house construction.To avoid any missteps, buy equipment for home heating, which are registered in the passport of the basic requirements for construction.
Ventilation in the boiler room
Now the installation should be performed before lowering the gas pipeline.It should be noted that he made omitting only specialists of the organization.However, the opening is provided in advance during the construction of the boiler room.If the room has to be large, it is better to make two small windows.It will provide an opportunity, if necessary, ventilate the area.In addition, in such a way they organize a more uniform daylight boiler.
When building boiler is extremely important to provide ventilation arrangement.For this purpose in the upper part of the bearing walls make a hole.It should be noted that the ventilation may not only be the top, but the bottom.Effectively all combined to make the system ventilation.
device upper floors
ceiling in the boiler
case of an accident will serve as a valve overlap, which will protect the design from the explosionwhich means that it should be easy.It is impossible to think that it will be cold.It logs will need to attach podshivnoy ceiling.His make of boards with a thickness of 30 mm.After that, you must put bituminous paper, which follows after the pour a layer of sawdust.The ceiling inside escaped with insulating material having a thickness of 4 mm.And then set the crate.
Wall Decoration boiler
After the construction of the boiler house is completed, it is necessary to arrange, having finishing work.All oshtukaturte walls and the floor leveled.
finishing Interior decoration must be of high quality.
- walls.Along the perimeter of their obkleyte insulating materials.Set bars to air gaps.In the bars and in the future will be secured panel PVC.
- Paul.You can leave the cement, but if you want to comply with the cleanliness of the room, it's best to put on the floor of stoneware tiles.
arrangement for the smooth operation of the boiler bypass, there should be a place for the supply of cold water to the boiler and consequently, output from him to the house hot water.
If the electric boiler
electric boiler - it is the most secure unit for heating the house.The coolant in the boiler does not emit combustion products and, consequently, for its ventilation arrangement is not necessary.Electrical heaters are easy to install, easy to care for them and serve.Efficiency of the electric boiler in many cases up to 99%.The unit works almost silently.Lack boiler - complete dependence on electricity.In addition, for home area of 200 m2 is required 20 kW boiler.
Features space for installation of solid fuel boiler
Solid fuel boiler installation
igniting solid fuel boilers is minimized, and therefore the requirements for areas intended for their installation, presented little.Fuel to the boiler need to add to the load on a regular basis, and, therefore, access to it should always be free.The distance between the wall and the unit must be at least 10 cm. On the floor in front of the furnace stack steel sheet.Floor, as well as walls, should be trimmed noncombustible materials.The window for the boiler room with solid fuel boiler is calculated in accordance with the formula: 1 kW of the boiler 8 cm2 area of the window.
Before furnace steel sheet needs
Regarding the chimney, for its cleaning and inspection should ensure that the holes.The shaft of the chimney must be at least the same cross section and knee length.The surface of the plaster inside the chimney, it is important to insert the shaft or asbestos-cement pipes.
requirements for the boiler room with a gas boiler
- boiler room must be at least 6 m2, despite the fact that its volume can not be less than 15 m3.
- required in the boiler room must be installed natural ventilation.
- height in the gas boiler must be at least 2.5 m.
- window should have an area of at least 0.5 m2.
- for emergency drains and condensate is necessary to bring the boiler to drain.
- chimney should be above the roof ridge.The chimney must be equipped with additional channels for cleaning.
- is important to install a gas boiler so that around him was space for easy operation.
Now you know how to make the boiler room in the house.It is important to comply with all requirements.In this case units will work properly without posing danger to the household.
The construction boiler: