- Types sheds
- What you need for the erection of a canopy
- order of construction canopy
Dachnaya building called "overhang" is on the outerwith respect to the design of the house, made in the form of the roof of one or another form, equipped with a number of vertical supports.The purpose of the construction project (related, incidentally, to the class of small architectural forms) is to protect the limited recreation areas from the impact of a number of climatic factors (sunshine, rain, snow, wind and dust).
All known structures canopies can be subdivided into the following main types:
- Separately settling or Attached sheds adjacent to the outer wall of the structure and constructed over a balcony, porch or entrance.
- functional canopies, which act as protective or enclosing structures and characterized by their ergonomics and simplicity.
- Decorative awnings, issued in the form of original artistic compositions and used to decorate the overall ensemble of country buildings and the surrounding landscape.
The shape of the slope canopies known designs are divided into straight, inclined (or lean-gable) and hinged construction embossed shapes (arched, arched, pyramid, dome-shaped, and the like).
In addition, canopies vary in the class used for the manufacture of materials (metal, stone, wood, mixed), in their function, as well as size and location.
canopy above the
Before beginning installation work is necessary to prepare preliminary draft and decide the future of the canopy with his style, takes into account the design of the main buildings suburban area.When selecting a material for construction advise you to pay your attention to the polycarbonate, flexibility and plasticity which allows to build shelters in the form of the original volumetric structure.
We must not forget that your carport must be strong enough and able to successfully resist both wind and snow loads possible.This fact should be considered when selecting the angle of the roof structure and a canopy in the calculation of the cross section of its pillars.
Since being built adjoining wooden shed for cars:
What you need for the erection of a canopy
Electric drill for construction canopy
In this article we consider the widespread nowconstruction time, which is a frame made of a material selected from polycarbonate half coated.For its manufacture, you will need the following materials and tools:
- circular saw with abrasive wheel (small teeth).
- electric drill with a set of standard drills.
- aluminum and perforated tape and ready for the ramp profile for polycarbonate.
- screwdriver, screws, thermal washers and other consumables.
- Split or one-piece polycarbonate profile.
After preparing the sketch, you need to determine the material of the pillars, which can be selected from the following list:
- reinforced tube;
- wooden beams;
- Area metal;
- columns of bricks.
order of construction canopy
procedure for the construction of a canopy
deciding how to make the canopy should start with marking the territory for the future design and preparation of wiring installed in a protective sleeve in the area of shelter accommodation.
as a foundation under the bearing elements (rack), you can use any of the known building support structures from the following list:
- brick columns;
- metal pipe filled with concrete;
- Monolithic concrete supports, etc.
At arrangement bearing support structures under polycarbonate profiles, you can use the old frame that you were, for example, from dismantled greenhouse.Next
mounted roof sheathing, the thickness of which depends on the workload at her determined total area hinged cover.Needless roofing is installed in compliance with known technological standards, appropriate to the type chosen roof.
The following footage you will see a variety of canopies made of polycarbonate: