- preparatory stage
- frame for the pool made of wood
- pool of metal
Who does not dream of a hot summer day a dip in the cool water?Pool In suburban areas provide the opportunity at any time.Construction of permanent pools, taking into account the changes in temperature and precipitation, will cost a round sum.Inflatable pools can not ensure the freedom of movement in the pool, which I would like to have.A compromise solution is the arrangement of the pool with a skeleton.
frame pools with their own hands can be built as in a metal frame and wooden.
cleared and align pad
for pools with frame required smooth surface.If there is no need to create it yourself.Pre-calculated area of the future frame pools, you need to prepare the site for construction design: to align the surface of the chosen location, compacted soil and pour on top of the sand layer in the 5-7 cm.
Frame Pool is a structure composed of steel or wooden elements perform
frame for the pool made of wood
required construction materials and tools:
- pine lumber 100x50 mm plate with a thickness of 25 mm,
- construction hairdryer, screwdriver, hand auger, an antiseptic for wood and mastic of bitumen,
- screws (black) with washers suitable grommets,
- PVC awning fabric,
What building materials required for the construction of the pool frame, depending on the selected size.
first step is to treat the wooden beams with boards special antiseptic and allow to dry.
frame pools easiest to arrange in the form of a rectangle.In the corners of the supporting wooden blocks set the size of 100x50 mm.
Hydro posts and top rail
To better secure the timber to be immersed in a prepared using a hand drill a hole in the ground.To rack frame pool has become stronger, the part of which will be in the ground, you need to carefully handle the mastic asphalt.
along the longer side of the pool is further placed one or more supporting bar - depending on the size of the pool.To a support stand to mount the spacers requires that increase their stability.With
treated boards in the thickness of 25 mm, which are located parallel to the ground and attached to the support posts, you need to prepare the frame pool.
necessary to weld PVC
awning fabric must be cut out of previously manufactured by drawing, and weld seams using the hair dryer building.The fabric should be cut out of PVC so that its edge can be bend over the upper edge of the pool and to fix them.The finished fabric gently lowered into the pool frame with screws and carefully attached to the canopy of the upper horizontal frame bar from the outside.
Fasteners PVC fabric
Clapboard veneer finished pool on the outside for a more aesthetic appearance.
Simultaneously with the foundation of preparing awning that will protect the pool from external contamination.
staircase on the string
to the finished pool puts the ladder so as to not damage the foundation stretched.
pool of metal
frame for the pool of metal
frame pools of metal pipes is collected in a similar way:
- as the bottom frame acts as chipboard or MDF board size.To it vertically or at a small angle with the help of screws attached metal tubes which will serve as the frame.The horizontal part of the basin can be connected via the welding machine.
- Cutting base and canopy of PVC fabric is conducted in the same manner as in the regeneration of the pool with a wooden frame.
Emptying containers may be carried out by a well-equipped at the intersection of the bottom and walls of the hole was hermetically sealed with a lid or cap.