- Types ceilings with lighting
- materials highlighting
- comparing materials
- How to create a ceiling with lighting
- multilevel ceiling
Ceilinglights will create a special atmosphere in the room.Properly installed and adjusted the lighting in a multilevel ceiling - the source of this magic, created with his own hands.If, in addition to make moldings and cornice with LED light, the effect is simply stunning.
However, if you overdo it, you can spoil everything.So before you take on this job, you must first analyze the various types of illumination of the ceiling and how to install it.
Types ceilings with lighting
multilevel ceiling backlit
before a ceiling lighting, we must understand one fact: this design can greatly reduce the height of the ceiling.The average height will be lost 10 - 15 cm. Therefore it is better to take into account these figures, setting design.
interesting ceiling lights All ceilings with lighting are of two types:
latter type of ceiling is perfect for small rooms.Through this structure, the height is not reduced significantly.Of course, in such a way to create something complex fail.
For a truly beautiful and bright illumination it is better to fit a large room with high ceilings.However, in a small room can be a miracle if we approach the matter with love and fantasy.
Ceiling lights with their own hands created using special professional materials.There are three main technology of this coverage:
Another interesting method of lighting - the use of a conventional chandelier with multiple lamps.What type of lighting to choose - depends on the preferences of the owner of the apartment.
Rope - it's a great solution if the landlord wants to create something unusual.Rope has a number of advantages: it is bright, flexible, have a variety of colors and shades.If the owner suddenly conceives highlight not only the ceiling but also decorative elements of the interior, with the help of tubes dyuralaytovyh he will easily solve this problem.
At the moment, this type of highlighting the most popular solution.LEDs can be installed in a luminaire, and in the form of ribbons.LED strip has the same value as the Rope.It is extremely flexible and multi-colored.She can perfectly illuminate the edges of the ceiling, and a variety of solutions in the interior.However, the tape needs additional protection.
Lighting can make an apartment in the spotlights.With their help, you can create the effect of a starry sky and much more.Working with lamps easier than with tape.
The principle of LED backlight is shown in the following video:
process of mounting the LED backlight LED RGB is presented in the following video:
One of the best solutions,however, the installation of such tubes is better to trust the professionals.Neon is able to change the atmosphere in the room itself.And, unlike the Rope, this light is very long.
How to create a ceiling with lighting
frame plasterboard ceiling
ceiling with lighting is created in several stages.
Setting the backlight
ceiling illuminated with his own hands made of drywall or other similar materials.Plasterboard has several advantages, so this material is used more often than others.It should be noted particularly gypsum board such as the ease of cutting, the ability to change shape, ease of installation, as well as additional noise and heat insulation.Plasterboard is simply irreplaceable in many cases.
To make a ceiling with illumination, you must first carefully measure the surface and make future design drawing.Only then you can buy the necessary materials, otherwise there is a chance to buy too little out of necessity.
How to ceiling with lighting for mounting the ceiling plasterboard will require:
- fasteners (screws).
also better all the work carried out using a level.
After installing the batten to the ceiling drywall can be fastened to the profiles.But first it is necessary to cut it.That's what was compiled drawing.It is important to take into account every detail.It is particularly difficult to carry out work when installing spotlights, which must take into account each hole.Among other things, these will have to cut a hole in the drywall sheets.
When installing it is necessary to leave small gaps between the wall and the sheets of plasterboard.
highlighting multi-level ceiling
multilevel ceiling of GCR can be created using only one of drywall, or in combination with plastic, tension ceilings and other materials.Just looks fantastic stretch ceiling with drywall.Only in this way will require a special tool - namely, heat gun.
- ceiling design with lighting first thing you need for a multi-level ceiling, is, of course, drawing.
- Then the individual elements of the drawing are transferred to the ceiling.It is necessary to align the surface beforehand, so you do not have a problem.
- profiles are mounted on the plasterboard elements.The advantage of the FCL is fully manifested.Sheets can be bent and even mounted pieces.If the installation was made with breaks, it can then be sanded corners.
- When the plaster base is made, it is possible to fix the gaps in the matter of a tension ceiling.
- If you use all the same drywall, it is simply mounted in the gaps to the next level.
- important to consider in advance the location of lighting fixtures or LED strip.In multi-level ceilings can afford a greater variety.
- final touch - a special coating that does not allow the cracks to the ceiling.With its help, you can hide a lot of flaws.
Neon lights ceiling
Zakarniznaya lights Duralight
Combined ceiling lights
Demonstration of a stretch ceiling illumination: