- simplicity and speed of installation
- Basis for evroruberoida
- basic rules installation
- Technology laying
- imported and domestic evroruberoid
When the device flat roofsroof and roof complex configurations typically use the web material.There are many types of web material, but among them is the best and most durable - it evroruberoid.
euroruberoid - a modified roofing material made from synthetic and glass cloth base with the polymer and bitumen impregnation.The quality evroruberoid several times higher than normal roofing material.It is more flexible, durable, does not modify its structure at high temperature differences, it does not rot in a moist environment and durable.Working with roofing materials simply and quickly.For transport it is not required to use heavy construction machinery.
simplicity and speed of installation
cold laying method evroruberoida
Unlike conventional roofing materials it does not need to warm up, bitumen and polymer base perf
euroruberoid used in roof works for installation of the bottom layer and a top layer of a roofing web, as well as flat and sloping roofs and to roofs with complex configurations where only a manual method of laying.
Basis for evroruberoida
Priming the surface of the roof
euroruberoid nekaprizny material, it can be laid on the waterproofing and insulating layer on a cement-sand screed, but in any case notsurface covered with sand asphalt composition.Also, the material can not be laid on mineral wool and expanded clay.
basic rules installation
when needed evroruberoid
basic requirement, which inevitably must be observed - the definition of quality of web material.Pay attention to the integrity of the fabric, the quality of powder, adhesive strength, durability, flexibility and ease of application.
Before euroruberoid cover the roof, it is necessary to outline the strict vertical line.Along this line is rolled out roll.The edges of the material must match exactly with the outlined line.Slanting sheets evroruberoida will need to pack a stretch to create an airtight seal.
If you fit the web through the complex, it is possible to adjust by aligning the edge of the knife, so that they are identical.
How to put evroruberoid
- Availability bands overlap Each technology Roofing begins with the preparation of the base.To begin with, in most cases the web material used to repair the roofing layer.If the old layer can not be repaired, it is necessary to remove and clean the surface of its residues.On the leveled surface base coat should be applied using a primer and leave the surface to dry completely.
- Fitting and adjustment evroruberoida vertical line.
- Stacking of rolled fabric.Held hot and cold way.Cool way - is laying the foundation for evroruberoida without preheating.In this case, it is best to use fixation expanded clay gravel.But it can be used on flat roofs.For roofs with a slope appropriate to apply the method of laying hot.The essence lies heat styling that a burner for liquid fuel is heated to the adjacent surface of the sheet and the polymer and bitumen is viscous it is adhered to the substrate overlap.In order to secure the sheet stuck to the ground, along the track are hand-skating rink and heated burner outer seams.
benchmark for manufacturers evroruberoida nahlestnuyu left lane, it is easy to distinguish from the main blade so that it is hollow without a protective coating.
hot styling evroruberoida
roofing work with roll materials is carried out with at least 2 skilled workers.
imported and domestic evroruberoid
virtually no difference at all, the only difference is the technology of production.A composition and structure identical.
The following footage shows User laying evroruberoida: