- choice of materials
- structure interior decoration
- Exterior finish
- Finish inexpensively
Finish bath - is arange of activities.After all, in addition to external finishes, there are internal.Work on the appearance of the steam room have their own specific features because the atmosphere inside the building.The owner will give the aesthetic appearance of the floor, walls, ceiling, and at the same time to take into account security issues.
choice of materials
Beam imitation pine
Wood trim and tile baths For best as a finishing material to choose natural wood.The easiest way to create an attractive interior without expert - finishing baths lining their own hands.However, you can use the board.
If the funds on high-quality expensive materials is not enough, many owners choose to all premises baths, including a steam room, pine wood.This is not the best choice, because the material often contains a lot of pitches.
In an extreme case, if there is no choice, it is necessary to monitor the quality of the boards.Check for pockets of resin required.
If there are surplus funds, the steam room and washing is better to choose wood trees such as lime and larch.Linden will always have the original appearance, it does not darken and crack.This material is good for health.Larch is resistant to mold and mildew, it does not rot and is very long.In a waiting room at the same time you can make the finish pine and other cheaper materials.
If funds permit, it can be in the sauna finish wood abachi.
structure interior decoration
Plating baths inside
Finish bath with his hands has the general structure:
- crate.It is installed directly on the surface of the walls and ceiling.
- between the bars sheathing, usually stacked insulation and paroizolyator.In some cases, crate stuffed through a layer of insulation.
- Further mounted crate finishing material (lining or board).
- Sometimes after finishing applies impregnation.However, it does not use steam.
Tiled floor in the bath
Sex in the bath is finished with boards or tiles.The tile is better to choose a special, non-slip.Otherwise, sooner or later, you can get hurt, steaming bath.Tile is durable, and that its main advantage.You can also tiled and the walls in the bath.
tile on the floor in the bath
Larch - another good material for flooring.It does not rot, so for its strength and durability can compete with tiles.The only negative - the high cost of such material.
floor finish made after warming.All surfaces must be insulated bath.If the floor is concrete, the insulation is laid between layers of concrete.As an insulating material can be used expanded clay, gravel, and empty bottles.
Beautiful exterior finish baths
Exterior finish bath serves to protect the building and decorating.There are several ways to decorate the outside of the bath.
Otelka bath siding
To finish the siding required:
- coupling elements;
- plum basement.
This method is suitable for brick baths.But the structures of natural materials siding finish better not, he prevents the natural ventilation logs.Wood ceases to "breathe."
use of lime lining
Molded - ideal for both internal and external decoration.For external use is taken a little more thick lining.
Lining cracks can form in the foodstuff dries out too, or, conversely, to "wave" in the humidity.Material is mounted either on the crate, or directly on the wall.Vagonka - One of the most inexpensive ways to trim saunas and buildings.
unit house expensive lining.This material is used for covering all baths.It is mounted directly on the purlins, or on the wall.Battens often used when there is no confidence in the flatness of the walls.When decorating a wooden bath blockhouse heater is not used.
Beam imitation finish
This material - a kind of lining.He is a little thicker and more expensive.It is also used as lining for the interior and exterior.
tile mounted on a crate with screws.This is the best option of finishing any bath.Facade tiles will serve a long time.It does not cause destruction of the wood itself is very stable to unfavorable factors.
staining bath use of additional materials in the exterior are not so sure.After the bath can be protected simply by covering the special composition, as well as paint.
finishing technology here is very simple.
- Logs should be covered with antiseptic to protect them from mold, mildew and rot.If
- on logs cracks, then they must be repaired.Rotten logs me completely.Typically, they are found closer to the crown of the building and the windows.Equipment replacement is the same as in the repair of an old wooden house.
- Painting baths done in 2-3 steps.First on the cleaned surface primed.Once it is dry, it is necessary to apply a primer to those places that are poorly handled.When, finally, the primer is completely dry, you can paint the usual paint.You can use fire-resistant formulations.After drying, the ink layer can repeat the procedure if necessary.
Paint - finishing a budget option.Of course, such coverage would have to be constantly updated.
When Bath is finished, left to take care of the furniture.As a rule, all the furniture is chosen wood.This is the best material for such premises.Wood does not burn the skin and is completely harmless.It is not recommended to cover the furniture steam paint and other compositions.
Learn more about how to help you finish the following video:
Consider the basic materials for finishing baths:
Other videos you can find our video section Video of the finishing bath.
Exterior finish baths
Finishing with stone baths
Plating baths outside
Facing tile baths