- Why bred saw
- wiring methods
- Care saw
- types of band saws
Band saws are often sold in a blunt order.Professional tool, you must first dissolve, and then grind.Every two or three years, repeat the process wiring.Incorrectly diluted and poorly sharpened saw can ruin all the work.
How to sharpen the saw, and to dissolve right?First you need to understand the nature of these processes.After preparation of the hand tool is different from the preparation of the electric.In handsaws completely different shape of the teeth and technology work.
Why bred saw
layout - is a process in which the teeth of the band saw bend in different directions.Even teeth bent in one direction, the odd - in another.
Before dissolve the band saw, we must understand why it is necessary.Meaningless processes usually do not bring a good result.It is known that during cutting the cutting width should be two times greater than the thickness of the saw blade.If the cut is
wiring methods saws One of the easiest ways of breeding saw teeth by means of pliers.You just have to take each clove and turn down alternately in different directions.
As a result of this work will be folded half of the teeth to the right and half - to the left.Another wiring method is carried out with a special tool.
sharpening saws After breeding it is necessary to sharpen the saw.This is done using a special set of simple tools.Sharpen band saw can be easy with a conventional triangular file.During the sharpening by moving the file from you, it is pressed against the teeth.Moving in the opposite direction, it should be lightly dismissed.
If the saw blade can be sharpened only by means of a set of tools, tape can be brought into operation only one simple triangular file.
bandsaw teeth should be sharpened with two vertices.
The workflow can also erode the teeth with the help of the bar.When sharpening the saw constantly, then distributing gradually disappears, teeth are aligned.To return the instrument working form, breeding repeated again.Capital wiring and sharpening requires not so often.
Saw important to be able not only to breed and sharpen.It should also be able to store it.When the instrument is not in use, it should be placed in a warm and dry place.If the saw gets wet, it will rust.
necessary to take care of the instrument, and he will serve for a long time.Stored drinking usually wrapped in a material.It is also possible to provide for her case.Leave instrument in the winter on the balcony is not recommended.
types of band saws
a two-handed saw
Band saws different tooth sizes.It is also necessary to allocate:
- two-handed saws;
- single blade.
Handed saws sharpened and divorce as well as conventional single.All the difference of such a tool is that it works with two people at once.
With band saws often sawn wood and variety of this material.Wood does not require too much influence, it is a soft material that is easily sawed and drilled.However, in the process, it is desirable nevertheless to consolidate logs and boards.During sawing must be careful not to hold a hand too close to the cutting groove.This can lead to serious injury.