plasterboard ceilings decorate the kitchen for a long time owners.This material is attractive for its price, ease of installation.But many become boring just the same plane, and they already want to improve the design of the kitchen ceiling plasterboard.And it is quite possible to execute.Need just a fantasy and desire.
perform curves plasterboard
Now we'll show you how to make the design of the ceiling drywall in the kitchen with the help of supplements design different figures.Before you begin, you should take a piece of paper and draw on it the desire.
Then decide how to display the line on the ceiling.It is the right location to do the drawing.
There are several ways to create a line on the ceiling.
Here are some of them:
- With the use of a special compass.With it, you can do the right circle.To do this, the screw is screwed into the center of the radius and connects it with the help of yarn prescriber or pencil;
- points plotted on the plane of the hand, then executed a curve;
- Using the template, which is performed in advance and put it on a plate, you can line;
- In the latter case all done by eye.
Each of the methods used in his case.This creates real masterpieces of craftsmanship.
methods of making the bend drywall
Design ceiling in the kitchen of plasterboard is difficult without the use of shapes and curves.This requires to bend the material.Therefore, a question arises at any person who first wants to do the job himself (see. Art. Curly plasterboard ceilings - our primary objective, the fold).
When you run a small radius, this material is quite malleable.There should be just a little pressure on the drywall and it will take the desired shape, secure with screws.When performing this method radius suitable for any type of material.
to start working the sheet of material to be pierced with a special roller, or simply an awl.The holes should be applied across the sheet of pre-coated lines.
depth making holes to awl passed to the level of the core, you can not run through.The concave side should be profiled.
- The next step moisten drywall.The water must penetrate into the core material and impregnate it, but does not impregnate the reverse side of the fabric, otherwise moisture will be in excess and can cause the preform unusable.After the impregnation, the material should be lolozhit into the desired shape, if you have not picked up, bending should be performed by hand.Thereafter rigidly fixed side of the fabric.
Note: To determine the quality of getting wet, take an unnecessary piece of drywall and spend soaking in conjunction with the right material.You can always get a trial through the material and bend test to determine its degree of readiness.
This method is simple and does not require special equipment and skills.All the work is done the person with any level of training and does not require a lot of tools.The sheet of material can be just wet in the shower or bath.
you need to closely monitor the degree of getting wet, the material can be peremochit and spoil.For a start is better to get the hand to the wrong piece of drywall.
- In this embodiment, a sheet of drywall should be cut into pieces, with which will run the curve.Individually, each element attached to a profile and subsequently processed filler with which, and to create the right shape.This method can be arranged, in the presence of a small area of the bend.
Some make incisions on one surface of the sheet and then, put the desired multifaceted surface.Then, the processing is carried out by means of putty, brought shape of the product.For this embodiment, the entire ceiling surface should glue mesh.
The third way
This option is ideal if the thickness of the material not exceed 9 mm ., And designs rather flat shape.
- sheet is not subjected to pre-treatment, and simply attracted to the surface and is carried out by means of fastening screws.If you nip the sheet must be very careful, the degree of the load should be carried out with a uniform force.
Note: If, when Wei care of the work, all the same sheet crack, do not despair.Secure on the entire surface.Simply using a knife dorezhte crack on the back side.When finishing the construction putty, you hide spelling underneath.
This method may also execute a person without special skills:
- On one side of the sheet should be made perpendicular to the surface nadpily.Their depth should be 2/3 the thickness of the material.Number of notches depends on the configuration element;
- There is a caveat here.Hand hacksaw in this case does not fit, use a circular saw with an emphasis that adjusts the depth of cut.To avoid damage to the sheet attachment should be carried out carefully enough.
ability to perform bending and giving the desired shape depends on the material thickness.For example, drywall at a bend radius of about 180 cm over , without any problems, you can use a sheet with a thickness of 12.5 mm.Just this work should be carried out carefully. material with a thickness up to 9 mm , perfect to 130-180 cm radius.
material thickness of 6 mm can be bent to a radius of 100 mm.To make the strength of the structure, the elements should be performed in two layers, it is necessary to overlap the seams structure.
We told how to perform bend drywall, it can arrange plasterboard ceiling design for the kitchen.
Performing figures on the ceiling
Design ceiling drywall in the kitchen without figures, and probably not executed.Every owner wants to create a unique and memorable shape of the surface (see. Art. Multilevel ceilings plasterboard with their hands - an easy way to complex forms).
- Consider the example of multi-level ceiling.Before you begin, you should perform a pattern on the ceiling.Apply the desired shape with curves.It does not try to perform a particular pattern precisely.Apply about.Must be seen and the direction of the bending;
basis for the manufacture of a ceiling profile figures.It should be prepared rather carefully.The material for the production of which is quite easy to work with.Correctly executed design should strictly keep all the elements.
it helps fulfill ribs.They are performed in the manufacture of the material.The design of the ceiling plasterboard cuisine can not be issued without the figures, which are attached to the profile.
Let's look at the order of execution of the work.
- After printing on a sheet of paper, we moved it to the plane of the ceiling in the kitchen.And now you can start the installation of the profile;
- Try to accurately place the profile of the line patterning.In carrying out this work, the material is bent in both directions.For carrying on the outer side of the bend, the material should be notched for stiffeners.The number of notches corresponds to the configuration pattern;
- incisions should be done with scissors for metal.This will help to bend the material in the right places and to perform bends;
- When you bend to the inside of the material, the same ribs, too, should be notched.But to perform it as follows: note the point of bending and do not cut, and cut out the angle of the material with the vertex bend.After that, the profile is easily bent to the desired radius;
Do not pay much attention to large smooth curve.Plasterboard eliminate this defect.Paying particular attention to the connection profile with plasterboard, the greater the contact area, the better.The rigidity of the structure is never excessive.
It is not a difficult job, with careful implementation issues will not arise.The main thing is that the construction was carried out rigidly.Not correct assembling of the carcass structure may lead to cracking of all elements.
Process the seams
Kitchen Design ceiling plasterboard can not be performed without competent qualitatively eliminate seams.This work can give a complete view of the entire structure, and can spoil all the work done.
Stitches embroidered type is best putty using gypsum.But everyone knows one difficulty working with this material.Just quickly solidifies and hardens within a few minutes after the addition of water.It is very difficult to work.
- To perform this task, you must resort to tricks.Not to dilution with water and used as an additive in PVA glue.This will increase the quality and extend the runtime;
- This addition will extend the use of the mixture for a long time.And improve the quality of welds.Greatly increase the strength.When dismantling itself can not break the seam and the material.
End in this issue to supply quality made plaster ceiling plane.And mounting fixtures.Which in large quantities are in retail trade.Here you can select the desired type and configuration.
- should just have to remember one caveat.Wiring harness must be done before mounting the ceiling.Follow wiring qualitatively, without damaging the main lines of electricity.
Just on our website you can find out about other types of plasterboard ceilings.