first thing that catches your eye when you look at the critical Khrushchev - is low ceilings, which require a special approach for the repair.Finish them should not only be of high quality and stylish, but also visually increase the height of the room.
Repairing ceilings Khrushchev
What is needed to make the repair of the ceiling in the Khrushchev?First of all, define the purpose of the work - that is, figure out what you want to get a result.Suspended or tension structures, or simply do a little redecorating?
This step defines all subsequent.His choice also depends on the interior space, its content and functional purpose.
Today, the most popular option repair ceilings in the Khrushchev is the installation:
- drywall constructions
- stretch fabrics
- suspension systems
Ceilings of plasterboard in Khrushchev installed in the premises of any functional purposeto enhance its architectural and aesthetic qualities, improving acoustics, creating an
technology, which is mounted on the plasterboard in Khrushchev, includes the following steps:
- mounting frame,
- work installation of gypsum boards,
- the seams.
Direct mounting of plasterboard is as follows:
- hangers attached to the main support structure with screws and dowels;
- metal profiles are interconnected by means of special brackets so as to form a continuous frame in the form of a square;
- drywall screws to fasten profiles .
changing the shape of the frame, the distance between the profiles and suspensions can be prepared a variety of shapes and designs.Depending on the shape will change and functions of such a surface, its fire resistance properties, acoustics, etc.Thanks to the special curved drywall sheets can be created arches and domes.
Stretch ceiling structures
Khrushchev Tension ceilings can be installed in any type of premises, except where there is constantly high temperatures, ie. E. In rooms without heating.Their installation takes place in several stages:
- To begin perform all necessary rough finishing work .This includes sticking wallpaper or paint the walls, because the ceiling will be installed without masking film.
- Before installing the need to clearly define whether mounted inside the lamp - if not enough to lower the ceiling to 3 centimeters of the total height of the room.
- If the lighting is still being planned, it is recommended to lower the surface tension in the kitchen Khrushchev 7-10 cm .However, before you determine the number of illumination in the room, the height of the tension ceiling - read all the available information, all of the recommendations.
Tension ceilings in the Khrushchev quite easy to care for.If there is little dirt, enough to clean the surface with detergent (see. Art. How to wash a normal ceiling and tension).Important to such an agent in the composition is not comprised solvents.
Tip: if the ceiling had severe pollution, better dismantle it, clean, dry, and then re-install.
Installation of suspended structures solves the problem of cracks and crumbling , which are often found in buildings of this type.
Any damage to the coating can repair professional.If the diameter of the damage not exceed 1 cm , the wizard simply cause a special adhesive that prevents an increase in the size of the damage.This will save you from a complete removal and replacement of the ceiling.
Most residents Khrushchev faced with flooding and stretch material solves the problem of sealing the ceiling.To drain the water are special holes, the water comes out, the ceiling dries and acquires its original form.
Tip: sometimes in places of mounting fixtures melting occurs.More often than not through the fault of the landlord: the installation of lamps that do not meet the standards of power for suspended ceilings.To fix this, you need to wear a plastic ring with a diameter greater than the former, in place of fusion.
suspended ceiling in the Khrushchev - a special finishing construction, which is attached to the main surface.It is used both for decorative purposes and in order to change the room acoustics, sound insulation to achieve, to carry out communication and lighting.
In addition, the suspension design - 'this is so, it is possible the original design in the Khrushchev.
These ceilings are fixed on special wooden or metal frame, and it is attached to the main surface.There are several types of suspension systems:
Rack.It long modules, consisting of narrow strips of aluminum, which are connected curved edges.
To install it, you must do the following:
- determine the maximum height of the ceiling.
- at the scheduled place of the wall attach frame members and fix their nails.The upper part of the molding must coincide with the line of false ceilings.
- attach the frame to the line of false ceiling.
- set runs perpendicular to the main bearing parts of the carcass.
- connect the main guides to each other, inserting the tongue of one end of the connector at the other and bend.
- after the installation of all the elements, cut off the excess ends of the panel.
Cassette. frame consists of metal profiles in the form of rectangles, they are superimposed modules themselves - the tape.
These modules allow to project the general outlines of the interior: recess niches and relief items.With its installation height of the room reduced by 18-20 cm .
To install it, you will need:
- Metal profiles
- ceiling panels
- self-tapping screws
- Metal hangers
Installation takes place in several stages:
- mark the border with the help of the installed ceiling level;
- reinforce the perimeter of the room corner rails connecting them to the wall with screws;
- gently insert the cross-section;
- strengthen profiles, placing them parallel to the angle guide;
- finished creating the cells are mounted short transverse profiles.
Its installation takes place in a similar way:
- lay the background substrate;
- cover it with metal bars;
- mount the rack on top of the cell ceiling.
aligns ceilings Khrushchev
How to align the ceiling of Khrushchev?
to align the ceilings and updates, you can use the plaster.It will give the desired surface texture and form.
is done as follows:
- before applying the plaster is necessary to prepare the surface;
- then applied beacons;
- occurs immediately after plastering.
you can apply it in two ways: by spreading or spraying.
Tip: after applying the first layer is not aligned.Then there is a second layer is applied after each certain interval.The last layer align trowel, then it is checked and only then applied a special skim, the last layer.
Just on our website you can learn about the repair of suspended ceilings.