for interior decoration of flats has long been used by various kinds of molding the baroque and neoclassical.One of the important elements of such a finish are ceiling rosettes made of polyurethane, which choice is amazing.With the right approach
ceiling outlet in the interior play quite a significant role.Different types of products most often are: symmetrical moldings made in the form of patterns of flowers and leaves round or rectangular, flat or convex.
Ceiling Outlet RP can be used as an independent element of decor, or in combination with other types of embossed finishes ceilings: curbs, cornices and moldings.
Species ceiling rosettes
For their production, mainly used:
- Plaster, polystyrene or polyurethane.
- products are molded or profile, having a certain pattern flat or relief form.
- to create hidden illumination, are widely used profile model with a smooth surface.
is the most expensive, as are manufactured using a special base.Mounted on the ceiling in the form of finished products.There
like with smooth or embossed surface.
Their production is based on a combination of different patterns, which are located on a common basis.Ceiling rosettes embossed type, the price of which depends on the complexity of configuration, allow designers to create virtually any type of decorative finish.
particularly smooth outlets is drawn profile, which consists of several geometric shapes, arranged inside each other.
These models have a concave shape.Used for the decoration of suspended structures, thanks to the rooms created by the visual effect of the vast space, which creates an atmosphere of elegance and comfort.
ceiling rosettes of polystyrene foam of this type, as well as the dome model has a recess, however, comes in the form of squares.They are widely used to connect the chandelier or ceiling decoration.More often than not, they are mounted on suspended ceiling systems.
Methods of application
very popular now enjoy the socket on the ceiling, which is attached to the manufacture of the texture of natural stone, such as marble.
Their use is solved several problems:
- not require the use of products made from natural materials, which greatly reduces the cost of registration of the design of the apartment.
- Using models made in the classical style, combining elements to create a design in which the ceiling outlet in harmony with the wall samples.
Due to the fact that, for example, outlet Ceiling foam are white, they can be given any color that will fit harmoniously into the overall design of the room.However, according to experts, the decorative elements of white help to improve visual perception, besides, they create the impression of lightness and weightlessness trim parts.
means of fixing ceiling rosettes
mounting sockets with your hands is not a big difficulty.Despite the large number of models, the technology of their installation is not very diverse.
Most often, they are fixed in the center of the ceiling.Conventional decorative ceiling outlet of gypsum with a flat surface does not require use of any whatsoever other fasteners.So
- example, the model RP 1-03 used for decorating holes with a diameter of 40-90 mm slabs, as well as a ceiling box.As the main fastener used special flat hooks, which are intended for hanging various lamps (crystal lamps sm.Potolochnye - how to pick up).
Some types of outlets in the manufacture of coated with a layer of primer.
- on a wooden surface ceiling socket with hook is fixed with nails or screws.To this end, on the inside of the product made by a special notch, and on-site applied markings and screwed a couple of screws or nails are driven.
Tip!For larger models require a greater number of fasteners - no less than 6-10 units.
- Before installing sockets on the back side, a layer of plaster solution.And at the point where the surface with screws make small depressions.Next
socket is pressed against the ceiling and keep the mixture until completely hardened or set backup desired length.To avoid damaging the surface between the counter and placed the pad socket.
If pn already apply a layer of soil, the on-site installation in plaster make cuttings.Before that, the outlet is applied to the surface and contour outline marker or pencil.
Tip!The depth and diameter of the cutting should match the thickness of the ground socket, and after the installation is securely hidden under a decorative cap.
- further work is carried out in the same manner as described in the preceding paragraph.If detected under plaster cracks or crevices their solution must be sealed from the gypsum.
for installation on nags drill outlet in the required number of holes.
- the outside of the grooves made along the bore depth of about 15 mm.The ceiling in the place of marking the screws are screwed to tie up a few turns of wire.
Their edges are twisted.The number of twists depending on the weight pn outlet 103, as well as structural features of the ceiling surface.
- Before installing, the surface details of plaster plaster solution, and then give birth to the edge spins into the holes and set the pins, which are wrapped around the ends of the wire.As a result, the socket is urged towards the ceiling.
To prevent corrosion, varnish wire ends and folded inwards and grooves and pins shut the solution, after which the seats are aligned with sandpaper.
Installation outlets for ceiling hooks
- hook lamps, usually laid in the floor slab during construction of the house.For this purpose the mounting box and used to decorate the wall socket under the hook, which, according to GOST, used in heated rooms.
- hook size is adjusted depending on the thickness of the slab.Fixing it is carried out by means of a transverse bar.Next on the hook mounted socket with built-in clips that are designed to connect wiring to the lamp taps.
thereby providing isolation from the wires of metal parts design.
- Ceiling Outlet RP can be a different diameter than the hook that allows the lighting of different weights.
As experiencing ceiling outlet
Instructions for use of these structures provides testing being carried out after the completion of the repair or construction of the building.This is done in order to determine the reliability of mounting sockets and hooks.
During the inspection, to the housing outlet suspended load, the weight of which is gradually increased.The test is considered successful if at the end of 10 minutes, the outlet is not left out of the hole in the plate or box.
videos and photos on the site make it possible to examine in greater detail the process of fitting and installation of various types of ceiling outlets.This will help to conduct their own installation of decorative elements of any complexity.