How to decorate the ceiling in the kitchen?Of course, the quality and durable material.After
durability ceilings in the kitchen due to the correct choice of material, resistant to temperature changes and humidity.There is another condition that must be observed when it comes, the better to decorate the ceiling in the kitchen, it's hygienic material.
ceiling must be easy to wash, to maintain the required cleanliness in the kitchen.Consider the most popular and common methods of finishing material in the room.
How to decorate the ceiling in the kitchen having a flat surface
If the ceiling covering relatively flat, the owners are lucky, given that you can use any kind of finishing material.Preparatory work will be reduced to a minimum: the removal of old coatings and removal of minor defects, therefore, the price of finishing significantly reduced.
How to decorate the ceiling of the kitchen inexpensive material
Option fairly traditional, but it has
- simplicity of the process that allows you to perform all the work by hand.
- minimum flow mater, money, time.
Tip: If you plan to host entered by staining the choice of finishes for decoration, with the emergence of yellow spots, then before applying the paint, it is necessary to cover contaminated sites alkyd enamel white.
Stucco ceiling tile in the kitchen
Ceiling tiles also applies to low-budget finish in the kitchen ceiling structure.
The main advantages include:
- availability of raw materials.
- simple installation, which can be implemented independently, and need simple instruction.
- tile have the ability to paint in any color if the old dirty or tired (see: How do and how to paint ceiling tiles: choosing paint).
Tip: Because of the high humidity and temperature differences, it is best to choose laminate finishing material.On sale there are different tint materials, including elements that mimic marble or wood.
But this material has certain disadvantages that should be considered when choosing the material:
- virtually impossible to stick the tiles on the ceiling, if there are significant irregularities.
- material is not fire resistant and low quality decorative coating.
provided two kinds of finishes for the most suitable for low ceilings and for saving money and time .Consider options for finishing the ceiling in the kitchen with a rough surface.
Options finishing the ceiling in the kitchen with the big differences
If a flat surface there are no problems, then there are large differences in the restriction and it is very difficult to choose.In order not to waste too much time on preparation and finishing the ceiling with large differences, it is best to set the tension or suspension system.
This choice is due to a number of distinct advantages:
- There is no need to make routine work on plastering.
- There is a possibility of additional installation of noise, heat and sound insulation.
- Hide various communication and engineering systems.
- conducting an experiment in the design direction (creating multiple levels and light effects) for zoning.
Reference: Perhaps the only drawback would be a slight loss of usable area (reduction of the ceiling), which is worth considering, if the kitchen is quite small with low ceilings.
Suspension design can be used with some materials.So
- Gypsum option would hide all the irregularities of the system to create various shapes and designs.But the kitchen is best to apply a waterproof GLA or during finishing apply a layer of fiberglass.
- Pinion suspension structures perfectly suited for finishing the ceiling in the kitchen (kitchen ceiling sm.Reechnye do yourself).Through Reiki, made of lightweight aluminum, a lightweight design, but quite reliable.
- plastic panels will ensure practicality and hygiene in the room.They are simple to install, affordable and available to use.
- tensioning system will also allow to solve a lot of problems with the ceiling.About neither hygienic, practical, have excellent external aesthetics and provide a variety of options for decoration.
Tips for finishing the ceiling structure
Consider the most common methods of finishing the ceiling detail, is suspended plaster ceiling design and alignment using putty material.Consider just the basics of the two types of finishes, the use of which will perform finishing yourself.
Hanging drywall constructions
- During installation, the novice master recommended to learn how to use a water level construction .The first marking is on the wall, at a distance from the support of the ceiling, not less than the thickness of the metal profile CD, is about 25 mm.
This ceiling, above the lift suspension structure is not possible, the count is made from the lowest point supporting the ceiling structure.
- then transferred tags to all corners, and is on the perimeter of the contour line using paint cord.This is the line and mark the lower part of the ceiling frame.
Next, move to the installation of the wall profile UD.The lower part of the profile should coincide with the reference line.
This mounted position and profile.There are profiles, which are available immediately with holes, if they are absent, they do in increments of 50 cm.
- then marked and drilled holes can be directly through the body profile.It requires drill 6 mm and dowels, equal diameter.
- Next, make a mark on the ceiling for the suspensions.Consider the case only with the transverse profiles, which is mounted much faster.
Given that the GLA has 250 cm in length, then we will do the layout in increments of 50 cm across the direction of a sheet of drywall.
- rescued on lines carrying ceiling mounted conveyor hangers, which will be mounted profile CD.Spacing peshkami provides not more than 60 cm and mounted on dowels that UD profile.
Tip: Given that most suspensions are mounted on a concrete base, and thus anchors often fail, it is recommended to use the anchor with the expansion, with a larger width than the seat.
- Next to Install Profile CD.Its length should be equal to the distance between the opposing walls minus 5 mm, leaving a seam allowance.
then inserts all the profile, but not bolted.
- for perfect flatness of the ceiling is necessary to align each profile using nylon thread .Then profiles and hangers are screwed together with screws.
Then, to the finished frame mounted sheets of drywall.
Tip: If a large area of the ceiling, it is recommended to install drywall sheets staggered, then there will be a big seam.
Procedure plastering of the ceiling in the kitchen
- Before starting work, you must get rid of old coatings. screed is done only on the basis of high-quality dense.
After all the preparatory work, the ceiling should be thoroughly primed and give it to dry thoroughly (sm.Gruntovka ceiling - a useful necessity).Then it is recommended to put down majachnye profile.
kneading the solution in a small amount, and the track is on the ceiling of a mixture, it is applied lighthouse and adjusted rule, see the photo.
- distance between profiles should be 15 cm shorter than the rule.Then, it should be given time to dry out the beacons.
solution in almost all cases is the same, according to instructions. after which the solution is applied between the lighthouse and is contracted by the rule.
Then, using a spatula, smooth out bumps are sealed and corrosion.
If the work is done putty, after the first layer is applied to the finish coat (satengipsa).After drying and disappearance of dark spots you can start grinding the diamond mesh or sandpaper.