Before you answer the question than to decorate the ceiling in the bathroom, you should pay attention to the types of finishes that can not be used in rooms with high humidity levels.Knowing
potentially unfavorable construction materials, should carefully examine the physical properties, cost, appearance, and technology allowed the installation of materials and structures to eventually choose the best option and finish the ceiling in the bathroom was right.
The finish is not recommended ceiling in the bathroom, the requirements for materials used
Bathroom by virtue of its mission is the most humid room in the apartment.In operation, it is constantly affected by sudden changes in temperature and the risk of being flooded neighbors downstairs.
Accordingly, any material used in the bathroom, must be not only moisture resistant, but also to resist the proliferation of fungus and corrosion. It is desirable that the materials do not need to use extra
Based on the above requirements, you can create a list of ceilings, the use of which is not recommended.
materials that are not suitable for use
- Painting enamel or oil paint , this coating under the influence of moisture loses appeal, gradually cracking, yellowing and crumbling.
- Whitewashing with lime, even though the use of this kind of whitewash previous generations, against the background of the diversity of modern materials Lime looks boring.Moreover, from time to time it needs periodic remover and applying a new layer.
- Cretaceous whitewashing , the same disadvantages as in the case of limestone, chalk, plus - a perfect environment for the development of the fungus.
- Paperhanging an ordinary plasterboard, particleboard, TWO .These materials absorb moisture well.At the slightest leak overhaul is required.
Modern ceiling finishes and application methods
Due to current market conditions, to think about what to decorate the bathroom ceiling is not necessary. main requirements when selecting modern materials and methods of finishing it within the parameters of the bathroom, personal aesthetic tastes, the cost of materials.
Painting latex or latex paint
If you do not want to lose the height of the ceiling, you can paint it with the help of special tools that are resistant to the effects of moisture, temperature changes and fungal organisms reproduce.However, if you choose this method will have to carefully prepare the surface.
In addition, if the neighbors happen to flooding, painting the ceiling will not save from moisture.
Consider the stages of work:
- Clean the ceiling of the old coating.
- Even if traces of mold on the ceiling available, with a 9% -uksusa or special formulations treat the surface to prevent the fungus to multiply.
- Seal cracks and crevices using putty.
Tip: To align the ceiling, use a putty based on water-resistant.
- Once the plaster dries, it is necessary to walk on the surface of cloth, removing any bumps, then, re-primed the ceiling. The choice depends on the soil of a particular type of paint.
ideal option is the choice of primer and paint the same manufacturer.
- to get the right shade of paint, Kohler added and thoroughly stirred mixture.You can paint the surface with a brush, spray or roller.
- A few hours later, when the paint is dry, another layer is made of the paint material, the paint should be applied at right angles.
Finished paint the ceiling with this technology, do not be afraid of wet cleaning.
Stucco using polystyrene tiles
Answering the main question, I would just say that finishing the ceiling in the bathroom using polystyrene plates are not the best option.And it is not even bad water-resistant qualities, and in the relative simplicity of appearance.
But if you need a temporary option finishes, or want to save money on repairs, then the process is quite podoydet.Glavnoe dignity slabs of expanded polystyrene is no need to perfectly align the ceiling.
But in this case necessarily require treatment by mold. tile is glued with liquid nails or universal adhesive with a pre-cleaned surface from dust.
suspended ceiling panels of plastic
this and all other species, discussed below, are to a certain extent influence the height of the room.While deciding how to decorate the ceiling in the bathroom, you should consider this nuance.
Consider the stages of work:
- machined surface of the ceiling, the maximum level of its descent.Next, create a frame of galvanized steel profile or a dry wooden beams.
Attention!Beam need pretreatment for maximum protection against moisture.
- Creating a frame is not possible without the use of special rails arranged parallel to each other and perpendicular to the direction of mounting panels.The distance between the panels - from 50 to 60 cm.
- After a competent installation frame all electrical components are in the corrugated pipe.
- panels are installed on the wall and fasten with screws.The new panel is in the groove of the previous one.
- During installation of panels to create a hole for placing lamps.As a rule, Stucco most common plastic panels.
Advantages: small price, ease of care, integrity, installation - just hanging skeleton.
Council.Glossy PVC panels will help to visually compensate for the loss of height, so using them will be extremely useful.
as plastic and galvanized profile - it's building materials possessing excellent moisture resistance performance.Moreover, the price of these materials are very accessible.
Even if there is a possibility on the more expensive finish, many people prefer to stop the choice on this form.
ceilings of the sheet of glass
sheet of glass, is the new, the familiar is not all building material.Not inferior moisture resistance of plasterboard on the number of advantages.
Thus it is flexible in the dry state, easily handled and has high strength.The installation procedure is similar to drywall, so it is suitable for installation instructions of the ceiling drywall.
Rack and coffered ceiling bathroom
hardest part in the regeneration of the rack or the coffered ceiling is properly mounted on the frame level.For facing is not required to make additional efforts.Slots
not, as rail snap on guide profiles.Compared with a number of other types of finishing the bathroom, suspended ceilings almost not afraid of the heat in the bathroom and humidity.
Huge selection of design solutions contribute to the active development of these ceilings on the market.
panels can not only have a direct path, but also to be curved, in addition, it is possible to give preference to easy assembly:
- set corners to the walls;
- for ceilings are fixed guide rails on the suspension;
- clothes rack at the bar.
coffered ceiling distinguished by the type of framing system.This system can be either open or closed.In the case of an open system visible part of the frame performs a purely decorative function.
When using a closed system is hidden under the metal frame cassettes.The first and the second embodiment does not use the fixing elements.
itself, aluminum - it is light and water-resistant material that does not corrode, so if even a question, than to decorate the ceiling in the bath, it is one of thethe best options.
staining the ceiling in the bathroom
So far it is the most inexpensive way to finish ceilings in the bathrooms.Make painting the ceiling with his hands very simple. painting advantages are as follows:
- acceptable price dynamics;
- no need to use a large number of tools for mounting;
- in the presence of a low ceiling height remains the same.
- removed the old layer of whitewash / paint;
- plaster check for cracks, if necessary, removed unreliable parts.
- start using putty or plaster joints and cracks are sealed, then using them you can paste over the grid;
- primed (with a strong soaking repeat twice) surface.
- align the ceiling with the help of putty and sand perfectly smooth ceiling to the state;
Tip: To see all the irregularities at each side, to the wall a powerful light bulb.The shadow will indicate the presence of irregularities.
- using a roller, apply latex paint in 3 layers, you can use the instructional video.Before you apply a new layer, you should wait for the complete drying of the previous one.
Stretch ceiling structures
Probably the most reliable option: aesthetics on top, leaving a minimum, leakage from the top is not terrible because robust design, cost affordable for most users.Is not it perfect?
For many question types, than to decorate the ceiling in the bathroom is not necessary, as the majority chooses ceilings.They can withstand enormous loads, and the design for every taste.
use of drywall constructions
even the most problematic ceiling plane is perfectly aligned with moisture-resistant drywall.
He fixed in 2 ways:
- gypsum mixture;
- suspended frame.
Ceiling slab of foam
Plates quite durable, do not yield to the influence of moisture.Standard size - 50x50 cm.
Fixation - using water-resistant glue.Installation methods can be seen in the photo that made the owners of the apartments during the repairs.