To start with a person decides to make repairs in the apartment, and then the question arises, what is better to do the ceiling in the room.At first glance, it's a pretty simple question, but if you think about, then immediately obvious that not all will suit any finishing.
Although nowadays and there are plenty of materials, but the choice must be done correctly and consciously.In this article, we'll show you how to repair the ceiling of the room.
you can view photos and videos on the topic and make the right choice.
determine the level of finishing
to choose the right material and the type of finish, we should first determine the level of coverage.
take into account all the nuances.And only after that decide which make the ceiling in the room.So
- Find the lowest level in the room and put a mark;
- After that we need to move this to the size of the other plane. To do this it is best to use a hydraulic level , which you can make yourself or buy at retail.Take
level and do the same marks on other planes;
- now connects the points obtained.To do this, use nylon thread.We just repel the level of the walls.
So we got the level of finish.We have the lowest plane of the placement of the ceiling.
look.If the difference is to see one. Then you can just spend a plaster ceiling.
If you want to cover up to two cm, then it is necessary to hold the plaster surface.If you see more than two, then you should think about the suspension or tensioning system.
way to finish
first step is to decide which way to choose.From this and it will depend on the material of manufacture.To do this, we must first determine the level of drop ceiling coverings.
View, you have anything to hide.For example, in the old buildings have a lot of communication that should not be shown to visitors.
Finish raw way
This is perhaps the most common way.And its price is the lowest.
Moreover, this work can be done entirely with their own hands and not to resort to outside help than to reduce the total cost of all the works.Therefore, we decided to stop in more detail on this issue.
This is an important stage of the work on which will depend on the appearance of the coating and the time that it will serve.So
- The very first step is to do a complete cleaning of the surface of the previous coat.You can use a wet or dry, it has a detailed article on our website;
- examine the ceiling and determine the job.If you have a plane damaged by a fungus, then it is necessary to eliminate this disease (sm.Gribok ceiling - the emergence and solutions).
To do this is to process the surface of antiseptics, which are in the retail trade.It should give preference to mixtures with deep penetration.
Such work should be carried out twice and allow to dry completely the surface, and only then do the main work;
- Now we have to clean up material that began to exfoliate.See all the cracks.
If they are, then they should increase the width.This desire for better and better application of the next layer.
Preparation of solution and application
The quality of the solution will depend on the quality of the entire deposited layer, appearance and durability of the surface .So you should take the matter seriously.
Note: To use you can apply two kinds.It finished material finishes and a dry mixture.When
not a big plane coating can be applied to the finished material.If the surface is large, then you should buy the dry mixture.
It will cost much less in contrast to the first option.
- makes the mixture for plastering.To do this, use the "Start".
- pour dry mix into a container.This is best suited plastic ware.
You can use the capacity of a paint.It can perform batch quality.There
bottom smooth and well mixed powder.Add water and mix simultaneously;
- After that, we need high quality mix.To avoid lumps and the material was elastic.
To do this it is best to use a grinder attachment.That it is possible to achieve complete homogeneity of the material;
- Please be material to the composition of the cream.If the mixture should be thick add water.
This work should be done in the following order:
- first step is to carry out the primer surface.This is done using a roller or spray.We are waiting for the complete drying;
- with a spatula Apply the first layer on the surface.At this stage, you should not worry too much about the irregularities;
- Waiting for drying;
- After that we put the next layer.This is done as long as the bar coating remains within 5 mm;
- Then do finishing.To do this, apply a dry mixture "Finish."
Knead as described earlier.Apply it with a wide spatula.
This is to be done accurately enough.The surface must be flat;
- Waiting for drying.Take the mesh for grinding plane.
is put on the holder and three.Movement is performed in a circle, and with no pressure;
- then makes inspection.Those places where there is a sink, fill the new mixture.After drying is overwritten;
- do so to the full alignment of the plane.
Note: If the grout should first apply a grid with large cells.After full alignment plane should be processed by a grid, only small cells.She
eliminate all stripes.
Once the surface preparation is possible to think and what to do in the ceiling of a small room.
After the plaster has several options lining:
- The oldest is whitewashing the surface .This option is chosen by many owners.
This can be done relatively cheaply and quickly.However, such a material is rather low durability.
And humid, too, it is not necessary to apply.The surface fairly quickly imbues moisture and exfoliate.There are many spots;
- It is possible to paint the ceiling .It's not much different from the whitewash in the price but this is much more durable.
And so finishing can be done in areas with high humidity.
- Same often made using stucco finish .Which is made of plaster or plaster and can make their own.Which will greatly reduce the cost of the entire structure;
Warning: Stucco is also in retail.It has two types, which vary in material manufacturing.There
of polyurethane foam.The second option is cheaper, but just note it is much smaller and it is not necessary to stir in direct sunlight.
Now you know how to do the ceiling in the room, the most traditional and affordable way.It's not a difficult job that can be done by hand.
But it does not fit if you want to hide the tube, or in a room very big difference.In this case, you will need to harness.
This second option of finishing.These may include ceilings as well.
This option may be suitable for some of the best facilities.Let's deal with this issue.
This design has many advantages that are not available in the first version:
- Suspension System can hide the flaws of the base of the ceiling .Especially in any quantity.
It is possible to make the plane in several levels;
- During installation, you can provide and the additional heat and sound insulation.Just need to make a preliminary sketch.
Conduct measurements and calculate the correct amount of material.If you apply a tension system, then you carefully examine all the parameters of the system, the instruction is included for each type;
- If you apply when installing drywall, then you will not know the problems with the service.It's pretty simple.
Especially opposed to mechanical stress.Even if that happens, then you can just paint damage;
- Any suspension systems is quite durable and will last for many years owner.
In these materials, eat and disadvantages:
- For most small disadvantage is a reduction of useful area;
- If you plasterboard can do with their hands, the tensioning system fail.There will need to hand specialist.
suspended ceiling and can be easily damaged, and correct it will not happen;
- Their price is higher than the traditional method and the amount of work is much higher.
On our site you can find a variety of finishes, they have a detailed description and a rule execution.
Now that you know about how to finish.You just need to make the right choice and you're ready to go.
Just on our website you can about how to paste over the ceiling glossy wallpaper.